Autel Maxisys Ultra Scan Tool under $3879 (in 2024)
If you a serious mechanical tech and looking for the best, then congrats. You found it. Look no further than the Autel MaxiSYS Ultra! If you are not prepared to spend big bucks, then go now to our Top 10 Bidirectional Scan Tools.
Don’t forget to also peruse our oscilloscopes, spectrum analyzers, and other electronics lab tools.
I recently had the opportunity to test out this top-of-the-line intelligent diagnostic scanner, and I have to say, I was thoroughly blown away. With its 2024 upgraded Topology 2.0, the Autel Ultra can accurately display the true structure of ECUs, making it easier than ever for professional technicians to locate and solve problems quickly.
Pros
- Comprehensive vehicle coverage.
- Advanced bi-directional control.
- Extensive data logging and reporting.
- Regular software updates.
Cons
- Initial setup may take time.
- Technical support response times may vary.
- Battery life may be shorter than expected.
- Software updates may introduce bugs.
One of the standout features of the Autel Ultra is its 5-in-1 VCMI, which combines VCI, oscilloscope, waveform generator, multimeter, and OBD2 CAN BUS Check in one interface. Power packed! This advanced technology allows the Autel Ultra to perform super precise and overall diagnostics and services on 99% of vehicles on the market without needing any extra tools.
Overview of the Autel MaxiSYS Ultra 2024
This is the most intelligent scanner in the industry. It integrates OE Technical Service Bulletin, step-by-step repair tips, DTC Analysis, Component Measurement, Relevant Cases to improve diagnosis and repair efficiency to the greatest, repair efficiency is improved at least by 200%, it’s the best choice for large car workshops. The Autel Ultra is equipped with the advanced 5in1 VCMI combining VCI, oscilloscope, waveform generator, multimeter, and OBD2 CAN BUS Check in one interface. With the top VCMI, Autel Ultra can perform super precise and most overall diagnostic and services on 99% vehicles on the market without extra tools.
The Autel MaxiSYS Ultra has everything needed for a large car repair business. It enables OE-Level ECU programming & Coding. For Benz, Autel Ultra can perform Post-programming Learning, Programming Restoration, Vehicle Configuration Synchronization, Read/ write Adjustment Value, Implicit Coding, SCN Coding Based on Big Data. For BMW, it can do Entertainment System HTTP Programming, High Voltage System Programming, Automatic Calculation Programming, Personalized Data Backup etc. The Autel MaxiSys Ultra automotive scan tool can perform effective ECU Coding to match the replaced modules, write adaptive data, install pre-programmed modules, simulate high-end functions, and optimize the specific performance of vehicles.
The Autel MaxiSys Ultra flagship car diagnostic scanner can perform the most comprehensive 40+ services on the 99% vehicles, including Oil Reset, EPB Reset, SAS Calibration, Battery Reset, Throttle Reset, ABS Bleed, Injector Coding, Power Balance, Key Coding, Suspension Calibration, VGT Turbo Calibration, Transmission, Headlamps, Window Door Roof etc. Together with full bi-directional control ability, Autel MS Ultra helps techs find and solve questions flawlessly.
The Autel MaxiSYS Ultra has the widest vehicle coverage than any other scan tool. Besides all the regular protocols, it also supports J2534, D-PDU/ RP1210 and CAN FD/ DoIP protocols, covering the latest vehicle to 2023 and even 2024. With FCA Group permitted, technicians now can utilize Autel Ultra directly on 2018 & newer FCA cars (Chrysler, Dodge, Jeep, Alfa Romeo, Fiat) to perform intelligent diagnostics, codings, services, and active tests, no more than 12+8 cable needed.
Intelligent Diagnostics and Repair Assistance
This scanner is the most intelligent in the industry, with OE Technical Service Bulletin integration, step-by-step repair tips, DTC analysis, component measurement, and relevant cases to improve diagnosis and repair efficiency. I found that the repair efficiency was improved by at least 200%, making it the best choice for large car workshops.
With the advanced 5in1 VCMI combining VCI, oscilloscope, waveform generator, multimeter, and OBD2 CAN BUS Check in one interface, the Autel MaxiSYS Ultra can perform super precise and most overall diagnostic and services on 99% vehicles on the market without extra tools.
The Autel MaxiSYS Ultra also enables OE-Level ECU programming & coding, which works on BMW, Porsche, VW, Audi, Nissan, Hyundai, Kia, Renault, and more. The automotive scan tool can perform effective ECU coding to match the replaced modules, write adaptive data, install pre-programmed modules, simulate high-end functions, and optimize the specific performance of vehicles.
Enhanced Topology Mapping 2.0
As someone who has used the Autel MaxiSYS Ultra 2024 MSUltra Top Intelligent Scan Tool, I can confidently say that the Enhanced Topology Mapping 2.0 is a game-changer. Unlike other brands’ topology mapping that is only a simple graphical picture based on protocol and can’t display the true structure of ECUs, Autel Ultra’s 2024 enhanced Topology Mapping 2.0 is drawn based on automotive authentic modules’ circuits to reflect real connections between ECUs underneath. This feature helps professional technicians locate troubles quickly and precisely in seconds, making it an invaluable tool for large car workshops.
I found Autel Ultra’s Topology 2.0 to be extremely helpful in improving diagnosis and repair efficiency by at least 200%. It’s a must-have for any technician who wants to work smarter, not harder. With Autel Ultra’s enhanced Topology Mapping 2.0, I was able to diagnose and repair problems that would have taken me much longer to solve with other scan tools.
Advanced 5-in-1 VCMI Technology
This powerful scanner combines VCI, oscilloscope, waveform generator, multimeter, and OBD2 CAN BUS Check in one interface, making it a valuable tool for any large car workshop. With this top VCMI, I was able to perform super precise overall diagnostics and services on 99% of vehicles on the market without needing any extra tools.
This intelligent diagnostic scanner also has the ability to perform effective ECU coding to match replaced modules, write adaptive data, install pre-programmed modules, simulate high-end functions, and optimize the specific performance of vehicles. The ECU Coding works on various car brands such as BMW, Porsche, VW, Audi, Nissan, Hyundai, Kia, Renault, among others.
The Autel MaxiSYS Ultra also boasts a full bi-directional control ability and can perform the most comprehensive 40+ services on 99% of vehicles, including Oil Reset, EPB Reset, SAS Calibration, Battery Reset, Throttle Reset, ABS Bleed, Injector Coding, Power Balance, Key Coding, Suspension Calibration, VGT Turbo Calibration, Transmission, Headlamps, Window Door Roof, and many more.
ECU Programming and Coding Capabilities
This feature allows you to customize your vehicle’s performance by adjusting various settings in the engine control unit. The Autel MaxiSYS Ultra can perform ECU programming and coding for a wide range of vehicles, including high-end cars.
One downside is that not all the mentioned functions are universally compatible. Before purchasing, you need to send your VIN to Autel to check if your vehicle is supported. However, this is a minor inconvenience compared to the benefits you can gain from ECU programming and coding.
Customer Reviews
After using the Autel MaxiSYS Ultra 2024 MSUltra for a while, I decided to check out what other customers were saying about it on the web and on Amazon. With a 4.7-star rating and 57 reviews, it’s clear that many others are happy with their purchase too.
One customer mentioned the programming capability and the nice big screen for better viewing. Another customer loved the built-in service procedures and the scope function. A third customer was frustrated with their previous scanner and found this one to be the best diagnostic tool they have used.
Customers seem to be very satisfied with the Autel MaxiSYS Ultra 2024 MSUltra. It’s user-friendly, powerful, and comes with a lot of extra goods. The detailed and easy-to-view data pids and the Bluetooth scope are also popular features.
Comprehensive Vehicle Coverage
This top intelligent scan tool has everything needed for US large car repair businesses. With its 5-in-1 VCMI valued at $2000, it can perform super precise and most overall diagnostic and services on 99% vehicles on the market without extra tools.
The Autel MaxiSYS Ultra also enables dealer-level ECU programming and coding. For BMW, it can do Entertainment System HTTP Programming, High Voltage System Programming, Automatic Calculation Programming, Personalized Data Backup, and more. The automotive scan tool can perform effective ECU coding to match the replaced modules, write adaptive data, install pre-programmed modules, simulate high-end functions, and optimize the specific performance of vehicles.
The Autel MaxiSYS Ultra can perform the most comprehensive 40+ services on 99% of vehicles, including Oil Reset, EPB Reset, SAS Calibration, Battery Reset, Throttle Reset, ABS Bleed, Injector Coding, Power Balance, Key Coding, Suspension Calibration, VGT Turbo Calibration, Transmission, Headlamps, Window Door Roof, and more. Together with full bi-directional control ability, the Autel MaxiSYS Ultra helps techs find and solve questions flawlessly.
The Autel MaxiSYS Ultra has the widest vehicle coverage than any other scan tools. Besides all the regular protocols, it also supports J2534, D-PDU/ RP1210, and CAN FD/ DoIP protocols, covering the latest vehicle to 2023 even 2024. With FCA Group permitted, technicians can utilize the Autel MaxiSYS Ultra directly on 2018 & newer FCA cars (Chrysler, Dodge, Jeep, Alfa Romeo, Fiat) to perform intelligent diagnostics, codings, services, active tests, and no more 12+8 cable needed.
Overall, the Autel MaxiSYS Ultra is an excellent investment for any auto repair business, providing full coverage for a wide range of vehicles and advanced diagnostic capabilities.
Reviewer Final Comments
After using the Autel MaxiSYS Ultra, I can confidently say that it is a great investment for anyone in the automotive industry. The real topology mapping 2.0 and 5-in-1 VCMI make it easy to diagnose and repair vehicles. The large screen is also a plus, as it makes viewing data and codes much easier.
I appreciate the built-in service procedures and scope function, which have saved me a lot of time and hassle. The Autel MaxiSYS Ultra is also very user-friendly, and I was able to set it up and register it with ease.
I have used other scanners in the past, but the Autel MaxiSYS Ultra is by far the best diagnostic tool I have used. It is very valuable to my business and has helped me to diagnose and repair vehicles more efficiently.
Overall, I highly recommend the Autel MaxiSYS Ultra to anyone looking for a reliable and powerful diagnostic platform. Other lower cost options from Autel have been reviewed by our team.
